Reasons I Want a Elongated Toilet Bowl – Advantages & Features

Toilets prevent pathogens from entering the environment and safeguard the health of the whole community. Health is not the sole reason why toilets are made and used. It can be constructed with a toilet seat for a sitting posture in Europe and North America.

In extended toilets, there seems to be an agreement that grownups are considerably more comfortable. The bowl form is also much better for guys, providing them additional room where they most need it. More frequently than not the circular bowl is linked to earlier, smaller bathtubs.

Modern toilets have varying technologies. Toilets are usually built of ceramic, concrete, plastic or wood. Long bowls are 31″ long from the wall whereas round bowls are 28.” Max. Because circular bowls are cheaper than long bowls, they also save a few of bucks.

Let’s just get it on with why I prefer an Elongated Toilet Bowl and its advantages.

About An Elongated ToiletAbout An Elongated Toilet

An extended toilet bowl is oval which extends to the front of the room for more than a few inches. Long toilets and toilet seats are more convenient than round. The length of the bolt holes at the rear of the lavatory is around 18,5 inches. It is measured.

The longer bowl is more popular as the bathrooms are larger so that they look more current. When you sit down, they more precisely match a person’s bottom, allowing ample area for all toilet-based activities, both in front and rear.

 Those toilet kinds have the same toilet and deck as well as the loo’s egg form.

The form of the circular basin is linked with smaller, ancient bathtubs most commonly. Therefore, extended toilets provide a larger space on which to sit and are thus comfortable rather than toilets round. However, the above-mentioned size is only an estimate and various measurements are available.

Elongated bowls measure 18 to 19 centimeters, and are somewhat longer in length. Round and extended bowls are often between 14 and 14 and one-and-a-half” wide. However, the length of a two-piece toilet would be bigger than one.

The standard toilet measurements usually vary from around 28–30″ deep, 20,” 27–32″ deep, to 10–14″ rough-in.

Industrial standards are available for toilet seats. Every toilet has 5 1/2 sitting hole “Centers. Centers. There are 18 1/2 extended bowls “From the front of rim seat posts. The compact long toilets provide for small or small bathroom areas. There are many long toilets. They have an oval form, though.

What Are The Main Features Of an Elongated Toilet Bowl

Above all, the features of an Elongated Toilet attract us the most. So let’s have a quick look at the features- 

1. The Appearance Of An Elongated Toiletwhy would i want an elongated toilet bowl

There is an extended toilet bowl that extends into the front of the room for several inches more. In both around and extended front bowl, several toilet producers make many of their most popular types. Extensive toilets and toilet seats are considered more pleasant than circular.

As the bathrooms grow, the long bowl becomes more frequent, making it look contemporary. When they are seated, they fit in more snugly to a lower person and offer sufficient area for all toilet-based activities on the front and back. For males, the shape of the bowl is also far superior.

It provides you additional room where you most need it. The slant inside the bowl that helps to minimize splashing is appreciated by men.

The long-lasting bowl form is linked more commonly with older, smaller bathtubs. The bowl’s shape does not affect fashionable toilet components, such as the details on the deck, are of one or two pieces and whether there is a round base or a feature on the borders. The long-lasting bowl form is linked more commonly with older, smaller bathtubs.

2. Space of An Elongated Toilet BowlsSpace of An Elongated Toilet

Elongated bowls are more comfortable nowadays, while rounder bowls take up less room. You must create a floor space that is at least 30 inches wide and 60 inches long when planning the location where your toilet will sit.

Round-front toilets are typically 25 to 28 inches away from the wall. Toilets that are elongated measure 29 to 31 inches in length. The manufacturer determines the precise dimensions of a toilet. In general, an elongated bowl will be 2-inches longer in front than a circular bowl. 

It juts out less than any other toilet in the business, at 2512 inches front to rear. An Elongated Toilet is an ideal alternative for individuals who have a tiny bathroom. It’s also a fantastic choice for kid’s restrooms.

3. Space of An Elongated Toilet SeatsSpace of An Elongated Toilet Seats

Elongated toilets and toilet seats are believed to be more pleasant than round-shaped toilets and toilet seats. Generally people like elongated toilet bowls, but in a tiny bathroom, a circular bowl might save space. This, however, is not a universal rule.

These better suit the contour of a person’s bottom when sitting and provide ample space in front and rear for all toilet-related tasks. Elongated toilet bowls can extend up to 31″ from the wall, whereas round fixtures may only extend up to 28″. An extended toilet seat would most likely overhang a circular toilet, which is OK unless the toilet rim is visible through the hole of the toilet seat.

Traditional toilets are often circular in form. As a result, elongated toilets have a larger surface area to sit on and are thus more comfortable than circular toilets. Technically, an extended toilet seat will fit around the toilet, but the fit and comfort may be sacrificed.

4. AffordabilityAffordability

Toilet bowls with a round front are often less costly than elongated bowls of the same brand and design. Before installation, a conventional western toilet costs between $90 and $1,500. Standard models are generally a bit taller than 14 inches.

As a result, a round-front toilet will cost between $225 and $310, but an elongated toilet of the same design and brand would cost between $275 and $360. Because both types of toilets consume the same amount of water, selecting one over the other will not result in greater or cheaper water expenses.

Usually elongated toilets are priced between $100 to $400, with more expensive models costing up to $1,200. The cost of installing any toilet ranges from $45 to $130, depending on the condition of the pipes and the placement of the toilet.

In general, an elongated toilet costs somewhat more than an equivalent circular toilet.

What Are The Difference Between Elongated Toilet Bowl and Round Toilet Bowl

What Are The Difference Between Elongated Toilet Bowl and Round Toilet Bowl
source: https://bargainbathroom.com/

There is some basic differences Between the Elongated Toilet Bowl and Round Toilet Bowl. They are not very major ones, but if you consider them you will find them they do really matters.

  • Size

By speaking, an elongated bowl is 2-inches longer in the front than a circular bowl. Some manufacturers also provide a third toilet bowl that falls somewhere in the middle of the two sizes. Most building standards require a toilet to have at least 21 inches of space in front of it.

An extended toilet seat cannot be replaced with a circular toilet seat. An extended toilet, on the other hand, may be replaced with a circular toilet. Simply ensure that the rough-in measurement is the same.

Elongated toilet bowls can extend up to 31″ from the wall, whereas round fixtures may only extend up to 28″. They also save money since circular bowls are less expensive than elongated bowls.

  • Cost

Toilet bowls with a round front are often less costly than elongated bowls of the same brand and design. Most circular toilets cost between $100 and $400. Cheap toilets may be found for less than $100.

A two-piece, round-front, 1.28-gallon flush toilet with traditional design, for example, costs approximately $180. However, bear in mind that in terms of quality, you get what you pay for. Fancy toilets, on the other hand, may retail for as much as $600 to $1,200.

A toilet of the same type with an extended front costs approximately $230.

Nevertheless, setup prices are about the same for both kinds, depending on the placement of the toilet and the quality of the pipes. The cost of installing any toilet ranges from $45 to $130, depending on the condition of the pipes and the placement of the toilet.

As a result, a round-front toilet will cost between $225 and $310, but an elongated toilet of the same design and brand would cost between $275 and $360. When compared to round bowl toilets, elongated toilets are slightly simpler to clean.

  • Comfort

Despite the fact that both round and elongated toilet designs are utilized in the same way, the level of comfort differs. If you have older people in your house, a proper comfort height toilet with a circular bowl is an excellent choice for their comfort.

Longer elongated bowls are more comfortable than shorter circular bowls. The size of your toilet is determined by the amount of space available in your bathroom. Round bowl toilets are smaller than elongated toilets. So, if you have enough room, you should choose an extended toilet.

This is due to the fact that they have more seating room. It may also be simpler for men or children to use and offers a larger surface for individuals with mobility difficulties to get on and off.

Because they offer a larger surface area, elongated bowls are also ideal for children. They are also more suitable for toilet training chairs. If your home has a separate children’s bathroom, you should think about adding a circular toilet.

FAQs:

  • Can you replace round toilet with elongated?

Answer: An extended bidet seat will still install and work properly on a circular toilet, but the aesthetics and comfort of the seat will be considerably reduced.

  • Are elongated toilet seats more comfortable?

Answer: Elongated toilets and toilet seats are believed to be more comfortable than round toilets and toilet seats. They better suit the contour of a person’s bottom when sitting and provide ample space in front and rear for all toilet-related tasks. The choice between elongated and circular toilets boils down to the form of the toilet itself.

  • Will all toilets fit the same?

Answer: The majority of toilets will have a 12 inch rough-in. If you’re replacing an existing toilet, search for one that has the same rough-in. To accommodate a toilet with a bigger rough-in measurement, you will need to alter your plumbing layout or move the wall.

  • Is it better to have a one piece or two-piece toilet?

Answer: The majority of toilets will have a 12 inch rough-in. If you’re replacing an existing toilet, search for one that has the same rough-in. To accommodate a toilet with a bigger rough-in measurement, you will need to alter your plumbing layout or move the wall.

Answer: While there are several factors to consider when purchasing a toilet, including as height, bowl shape, color, design, and flushing technology, most toilets fall into one of two categories: gravity-feed and pressure-assisted. The market is dominated by gravity-feed toilets, although pressure-assisted versions are worth considering.

Conclusion

When It comes to spend some private time of the day, responding to the calls of nature, comfort is a must. Other than that many other factors like cost, size, appearance, etc. are there too. Considering the facts mentioned above, an Elongated Toilet Bowl is very much desired.

So, what do you think of this review? Any suggestions that may help us to improve? Please do share your opinion in the comment section.

Leave a Comment

shares