When you encounter a clogged toilet is when you will get through all sorts of questions. You will want to know the differences existing between auger and snake toilets for unclogging your toilet. Well, I want to tell you that these items vary based on using them and the components.
There’s no need to continue to hold such questions because we have come to your rescue. This article will provide you with everything you need to know about toilet auger and snakes. Everything will be made a piece of cake for you under this article.
For this reason, we shall try to offer some knowledge on how to use the two items, which is one of the ways to determine the difference. Additionally, we shall exploit different components you expect to meet in toilet auger and snake. Lastly, we shall summarize the content by pointing out some key differences between the two items. Continue reading our report for juicy information.
Snake clog remover
Snake is used to eliminate clogs in tubs, showers, sinks, and occasionally on toilets. However, experts don’t recommend snakes to unclog toilets because they tend to leave scratches on the porcelain. Snakes are smaller than toilet augers and therefore are meant to remove clogs from a pipe.
We normally have two major designs of snakes, i.e., the first one compliments a metal cable and a coil at the end. The spring is used to grasp the clog before pulling it out. The other design is usually a plastic strip featuring protruding edges that grasp materials and pull them out.
How a snake operates
Operating a snake is straightforward and relatively effective for tubs, showers, and sinks. Follow these steps to drive the nail home;
- Protective measurements: Put on some protective clothing like gloves because what you will deal with is dirty. You are therefore advised to wear rubber gloves so that your hands are protected.
- Get ready for all obstacles: Ensure there is no hindrance like drain traps or plugs to allow you to reach the drain easily.
- Inserting the cable: Drive the snake into the drain, followed by some push. Push it until you feel some difficulties, and this might be a clog or a bend.
- Twisting the snake: Under this step, you are supposed to twist your snake so that you grasp some materials.
- Pulling out the snake: You should only initiate this step if you’re sure you have grasped something. If it’s your lucky day, the clog will come out. However, sometimes the material may fall and get stuck on the way simply because it was not hooked properly. If so, continue to navigate to the next step.
- Repeating the process: Try to confirm if the snake reaches a clog and try to twist and pull out the material again. To be sure you have been trying to do, flush tests are a must. Therefore, the last thing to do should involve flushing water via the drain, and if it doesn’t run quickly, you have no choice but to snake again.
Let’s start by defining the toilet auger so that we know where we are heading. A Toilet auger can also be referred to as a closet auger. Usually, you will need a toilet auger whenever the plunger fails to work. For example, such a problem often arises when you accidentally flush something like a toy down your toilet. The auger contains an elongated metal tube plus a hook at the very end.
The tube is then wrapped around the crank that’s connected to a handle. You should first try to test the plunger, and if it fails to work, don’t hesitate to utilize a toilet auger. For your information, this approach tends to push and break through any clog via its head.
Unclogging a toilet with a toilet auger
Under this approach, the process is straightforward; follow these instructions.
- Put on some protective clothing like gloves because the process can be messy.
- Wound up the drill to the top
- Carefully attach the hook to the toilet bowl so that you don’t scratch the porcelain.
- Start cranking the auger slowly while pushing its tube in the toilet. Continue cranking until you encounter the clog.
- Keep pushing the tube in the drain while pushing it back occasionally. Doing so will make the entire process easier. You are also required to rotate the toilet auger but do it gradually.
- Whenever you feel the cranking is hard, know that you have arrived at the clog. It’s now time to start tearing it apart.
- After working on the drill, it’s now time to pull out your toilet auger and then gradually rotate it. Finally, threading it back to the case is necessary.
- The next thing will be to remove your auger from the toilet and then utilize the plunger for clearing the remaining clogs.
- To be sure of what you have been doing, try to flush your toilet severally to check if the clog was removed successfully.
- If you don’t see any changes, I would recommend you repeat the whole process. However, if the problem is still persistent after trying all these, employ a different approach or get a plumber.
Examples of toilet augers
You need to understand that these drills have some common features, but designs vary. Some of these toilet augers include;
Drum auger: This type gets its name due to the drum-shaped contain, which accommodates long cables utilized
Closet auger: This is a common model and performs better for toilets. They simply have an elastic tube that can be bent and twisted to access any toilet clog.
Power drill: There is a slight difference between this type and closet auger in terms of operation. However, it features a handy motor, useful for driving its tube down into the drain while winding it. With the help of the motor, it becomes effective when clearing clogs compared to closet augers.
Rocket Nozzle Auger: This type utilizes high-pressure water jets to get rid of clogs. It makes a good option when all other approaches fail.
Telescoping auger: Here is the last type of auger that operates excellently whenever the closet auger has failed. This toilet auger comprises extended cables necessary to work on deep clogs.
Key differences between snakes and augers
From the above discussion, we can point out some differences between the snakes and augers. Some of the differences include;
In terms of usage, we can say that snakes are mainly designed to eliminate clogs from faucets, i.e., sinks, showers, and tubs. On the other hand, toilet augers are primarily designed to clear blockages from toilets. This means that you cannot use snakes on toilets because they can leave the porcelain with some scratches.
When it comes to operation, toilet augers work through pushing to break through available clogs in the toilet. You are then required to apply some water flushes to aid in clearing the clogs. On the other hand, snakes are usually known for catching materials and pulling them out from the faucets.
Another noticeable difference is the size, whereby snakes tend to be smaller compared to augers. Therefore, it would help if you used a snake to remove clogs on pipes only and not toilets. When used on toilets, you might end up with porcelain scratches.
The length of the tube can also be used to determine the difference between the two approaches. Therefore, we are very right to say that snake cables are shorter compared to toilet augers. However, this is the very reason that makes auger suitable for deep clogs.
Toilet auger vs. snake: Comparison table
|Usage||They are designed to eliminate clogs from faucets, i.e., sinks, showers, and tubs.||They are designed to clear blockages from toilets.|
|Size||Tend to be smaller.||They are bigger|
|Operation||Operates by catching materials and pulling them out.||Augers work through pushing.|
|Length||Shorter cables.||Extended cables.|
FAQs About Toilet Auger vs. Snake:
- Can a toilet unclog itself?
Yes, it is possible, but that means you are very lucky. I say so because the causative of the problems plays a critical role and how serious the condition is. For this reason, if the blockage is made of non-degradable materials, it won’t unclog itself.
- Can I pour hot water into my toilet?
Though such activity is highly prohibited, I want to say that the action depends on the material used to construct your toilet system. For instance, hot water could destroy the pipes if the system is full of PVC or plastic material.
However, using hot water with some drops of detergent can remove clogs, but minor ones only. This means it’s not a reliable approach; go for a toilet auger or the plunger to tackle stubborn clogs.
Hopefully, you are now in a good position to determine the differences between toilet augers and snakes. Again you must have realized where to use each tool. From our report, snakes should only be used on smaller pipes like in sinks and showers, while toilet augers are ideal for unclogging toilets.
The article also offers some useful information like how to use each of the tools.
Learning how to unclog a toilet with a snake (toilet auger) could save you the cost of calling a plumber. Also called a “closet auger”, this tool will often work when a plunger has failed. If you haven’t already tried it, check out my video on How To Unclog A Toilet In 11 Seconds. You may not need a toilet auger.