How to Remove a Stuck Bathroom Sink Drain Flange- Solved

The bathroom sink becoming clogged is a pretty common issue. Almost every homeowner has faced this situation at least once in his life.

The sink drain flange is a seal made of rubber. You can find it in the sink bowl. Sink drain flange can become stuck for several reasons such as rust build-up, accumulation of debris, and so on. And it can lead to numerous problems.

This is not a suitable thing to deal with but is fixable. You can simply remove the bathroom sink drain flange following the right steps or method. By getting it done all by yourself, you can save expenses on plumbing services.

Now if you are searching how to remove a stuck bathroom sink drain flange without any professional support you are in luck! In this article, we have included all the details you need to know. 

Before calling a plumber, check out these causes and fixing methods. All you have to do is put in some effort and you will be good to go.

What are the reasons behind a Flange becoming Stuck?What are the reasons behind a Flange becoming Stuck

Every now and then, bathroom sink drain flanges get stuck. And there are a number of reasons behind it. But, the most common reason is simply aging. As the drain and flange become old, they are more responsive to rust. If your flange has become rusted and stuck, it should be replaced with a new one.

There are ways to loosen up rusted parts. But, often it will continue to create further issues if you don’t replace the flange.

To remove the flange, you’ll have to reach the drain pipe from the base. With the help of the proper supplies, you can push the flange up from the bottom. Lastly, you have to use a putty knife to raise the flange from the hole.

How to Remove a Stuck Bathroom Sink Drain Flange: Easy Ways to Follow How to Remove a Stuck Bathroom Sink Drain Flange

If you are confused about how to remove the bathroom sink flange, nothing to worry about. This step-by-step tutorial we are going to provide will guide you. We will also explain what to expect throughout each step and how to manage it. By following this tutorial, you can easily and quickly remove your bathroom sink flange.

Before starting, get your tools ready. 

Tools that you will need:

Here are the steps you need to follow:

  1. First of all, ensure the retaining nut is off the sink drain basket by checking below the sink. Using channel lock pliers, separate the securing nut of the sink drain basket. If the sink drain rotates while removing the nut, adjust the sink basket.
  2. To keep the sink drain basket steady, ask someone to hold the handles of a pair of pliers inside the sink drain basket. You can apply some lubricant to the threads and wait for an hour for it to sit. After an hour, separate the nut from the sink drain basket.
  3. If the sink flange is still stuck to the sink, use a utility knife to cut around the perimeter of the sink flange between the flange and the sink. This will secure some of the plumber’s putty below the flange.
  4. Next, keep a little wood board against the bottom of the sink drain basket under the sink. Hit the board using the hammer to crush the seal of the plumbers’ putty.
  5. Lastly, ask your helper to push a putty knife between the flange and the sink while hitting the board. Until the flange releases from the sink, run the putty knife around the sink flange.

How to Install a New Sink Drain FlangeHow to Install a New Sink Drain Flange

Once you’ve removed the sink drain flange, You obviously need to replace it with a new one. However, many people don’t know this method. So, we are gonna guide you through the process. You can take these easy steps and perform it all by yourself without any problem.

  1. First of all, you have to prepare the new unit. For this, you need to remove the mourning nut and install the plastic washer. The steps you will have to follow differ depending on your purchased unit.
  2. Then, use a pipe joint compound to secure the unit to the sink. Place it on the top side of the plastic washer that you put earlier. This will form a strong seal and stop water leakage.
  3. Next, apply plumbers putty to the bottom side of the flange. This also allows you to form a tight seal. Plumber’s putty is generally applied for functions related to sinks and draining.
  4. For installation combine the different parts of the drain. Press the flange as high as possible into the opening in the sink. Hand screw in the fixture until fit for the last tightening.
  5. After placing the flange, you will have to tighten the complete adjustment. This will hold it in place and make it ready to be used for a long time. You need to hold the unit with pliers or by hand while tightening the nut. This helps to lessen spinning.
  6. In this step, install a drain stopper. You have to press the stopper down into the opening in your sink.
  7. Next, put in the lever. It helps to lift and lower the flange. This will be different according to your unit.
  8. After installing the lever, connect it to the drain. You can perform this with the designated clip available in your purchased unit.

Related Questions: 

  • What if my bathroom sink drain is rusted?

If you find your sink drain rusted, you will need to follow some additional steps to remove the sink drain flange. This could include spraying the rust with lubricant and constantly hitting on it with a hammer to loosen it up.

  • How long does it take to remove a bathroom sink drain flange?

For any experienced professional, this can be done in a short time like 30 minutes to an hour. However, if you are not experienced, it can take an hour or more than that.

  • How do you unscrew a bathroom sink drain?

Find the plunger rod beneath the sink which joins the stopper to the strap. Detach the clip to separate the rod and the strap and next unscrew the pivot nut. After doing that the stopper will come out easily.

  • How do I remove a stuck bathroom sink drain nut?

To remove a stuck bathroom sink drain nut use a hacksaw to cut it off. Ensure that you cut it cornerwise through the locknut. Otherwise, if you are not going to use the drain basket anymore, you can cut it within the sink and the locknut and cut through the drain basket.

  • How do you remove hair from a sink drain?

To remove hair from a sink drain, Mix 1/3 of a cup of baking soda with 1/3 of a cup of vinegar. Next, pour it down the plughole. While it starts to bubble, it will clear any hair stuck in the sink drain. Leave the mixture to wet overnight. And then rinse it out with warm water.

  • How do I remove a stuck sink flange?

To remove a stuck sink flange, turn the locknut in a clockwise motion and detach the flange from the sink. If it is stuck, tap the bottom of the flange from beneath the sink using a piler. As a result, the grip on the sink drain flange will be loose and come out of the sink easily.

Final thoughts

Now you know how to remove a stuck bathroom sink drain flange. You might be surprised how simple it is to do it with few tools available at home. 

Besides cleansing your bathroom, you should maintain hygiene. So, you should replace bathroom materials after a short while.

There is no need to ask plumbers to do this job. You can cut off your extra expense on plumber service when you can do the same without their help.

This should come in handy when you can do it all by yourself. By removing a bathroom sink drain flange, you can repair it to prevent leakage. 

As you are aware of all the steps about removing a bathroom sink drain flange It is time to give it a try!

Hope you like this article. If you have any related queries please let us know. You can write your thoughts about removing and replacing the bathroom sink drain flange in the comment box below.

Have a good day!

to Remove a Stuck Bathroom Sink Drain Flange you should watch this video from below;

Leave a Comment